Removal and Replacement

Removal and Installation

CO-17 Exploded View:

REMOVAL
1. Remove reservoir tank.
2. Remove air cleaner case (LH).
3. Disconnect harness connector from cooling fan control module, and move harness to aside.
4. Remove engine under cover with power tool.
5. Remove cooling fan assembly from under the vehicle.

CAUTION:
Be careful not to damage or scratch on radiator core.

INSTALLATION
Note the following, and install in the reverse order of removal.

CAUTION:
Only use genuine parts for cooling fan mounting bolt and observe the specified torque (to prevent radiator from being damaged).