Floor Trim

FLOOR TRIM


Removal and Installation


REMOVAL
1. Remove front seatback and seat cushion (LH/RH). Refer to Removal and Installation.
2. Remove rear seat cushion. Refer to Removal and Installation.
3. Remove accelerator pedal pad. Refer to Removal and Installation.





4. Disengage clip of floor hook (1) with remover tool (A).
5. Remove foot grille (LH/RH). Refer to Foot Grille.
6. Remove front seat belt floor anchor bolt (LH/RH). Refer to Exploded View.
7. Remove center console assembly. Refer to Removal and Installation.
8. Remove rear floor duct 1.
9. Remove instrument lower cover (LH/RH), instrument lower panel (LH/RH) and instrument side finisher
(LH/RH). Refer to Removal and Installation.
10. Remove yaw rate/side G sensor. Refer to Removal and Installation.
11. Remove diagnosis sensor unit. Refer to Removal and Installation.
12. Remove console rear bracket. Refer to Removal and Installation.
13. Remove floor harness mounting clamps.
14. Remove dash side finisher (LH/RH), front and rear kicking plate inner (LH/RH) and center pillar lower garnish (LH/RH). Refer to Body Side Trim.
15. Remove floor trim mounting clips and fixing nuts.





16. Remove floor trim from floor trim fixing clips (A) and remove floor trim.

INSTALLATION
Install in the reverse order of removal.