Removal and Installation

STARTER MOTOR


VK50VE : Removal and Installation


REMOVAL
1. Disconnect the battery cable from the negative terminal.
2. Remove engine cover, using power tools. Refer to Exploded View.
3. Remove intake manifold. Refer to Exploded View.
4. Remove "B" terminal nut.
5. Disconnect "S" connector.
6. Remove starter motor mounting bolts using power tools.
7. Remove starter motor upward from the vehicle.

INSTALLATION
Install in the reverse order of removal.

CAUTION:
Be sure to tighten "B" terminal nut carefully.