Removal And Installation Navigation (Single Monitor)

AROUND VIEW MONITOR CONTROL UNIT


Removal and Installation


REMOVAL
1. Remove front seat (LH side). Exploded View.
2. Remove floor carpet. Keep a service area.
3. Remove around view monitor control unit mounting screws.
4. Disconnect connector and remove around view monitor control unit.

INSTALLATION
1. Installation is the reverse order of removal.
2. Perform camera image calibration. Navigation (Single Monitor).
3. Perform predictive course line center position adjustment. Navigation (Single Monitor).

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.) and replacing the around view monitor control unit.