Rear Suspension Member Inspection

REAR SUSPENSION MEMBER


Inspection


INSPECTION AFTER REMOVAL
Check rear suspension member for deformation, cracks, or any other damage. Replace if necessary.

INSPECTION AFTER INSTALLATION
1. Check shock absorber actuator harness connector for proper connection (with Continuous Damping Control).
2. Adjust parking brake operation (stroke). Component Tests and General Diagnostics.
3. Check wheel alignment. Rear Suspension Wheel Alignment Inspection.
4. Adjust neutral position of steering angle sensor. Description Special Repair Requirement Description Special Repair Requirement, "ADJUSTMENT OF STEERING
ANGLE SENSOR NEUTRAL POSITION : Special Repair Requirement".