With Navigation

SIDE CAMERA LH

Removal and Installation


REMOVAL

1.Remove door mirror glass (driver side). With ADP (with ADP) or Without ADP (without ADP).





2.Remove screws (A), and door mirror actuator connector, and then door mirror actuator (1).
3.Remove door mirror under cover. With ADP (with ADP) or {LINK_TO_MANY:0000000007459459}{LINK_TO_MANY:0000000007459460}, "Exploded
View" (without ADP).





4.Remove screws (A) and connector (1), and then remove side camera (LH).

INSTALLATION

1.Install in the reverse order of removal.
2.Perform camera image calibration. Work Procedure.

CAUTION:
Perform the calibration and perform the writing to the around view monitor control unit when removing and replacing each camera, removing the camera mounting parts (front grille, door mirror, etc.)
and replacing the around view monitor control unit.