Valve Clearance: Specifications

Valve Clearance Adjustments





Note: To adjust valve clearance, apply engine oil to the cam as well as to the adjusting tappet (2) with the cylinder head built on the cylinder block, give a few turns to the camshaft by means at timing pulley tightening bolt, and measure valve clearance when the nose of cam is just opposite of maximum cam IN (1) as shown in illustration.

Valve Clearance Standard Value (cold)
Intake 0.23 mm - 0.33 mm (0.0091 inch - 0.0130 inch)
Exhaust 0.25 mm - 0.35 mm (0.0098 inch - 0.0138 inch)