Extension Housing (4X2)

Extension Housing (4x2)





Disassembled View

Disassembly
1. Remove the gasket.
2. Remove the tube.
3. Remove the tube packing.
4. Using a screwdriver, remove the oil seal.

NOTE: The oil seal can be removed without removing the dust deflector.

5. Remove the dust deflector from extension housing.

Reassembly





1. Using oil seal installer, install the new oil seal to the extension housing.
Oil seal installer: 5-8840-2702-0

NOTE: The oil seal can be installed without removing the dust deflector.

2. Install the tube.
3. Install the tube packing.
4. Install the dust deflector.
5. Install the gasket.