Return Hose - Pump to Cooler

RETURN HOSE - PUMP TO COOLER

REMOVAL





1. Siphon the power steering fluid from the reservoir.
2. Disconnect the return hose (5) at the pump (1).
3. Disconnect the return hose (5) at the cooler (4).
4. Remove the return hose (5) from the vehicle.

INSTALLATION





1. Install the line (5) to the vehicle.
2. Reconnect the power steering return hose (53) to the power steering cooler (4).
3. Reconnect the power steering return hose (5) to the power steering pump (1) Tighten to 28 Nm (21 ft. lbs.).
4. Refill the power steering fluid and bleed the system.