Hose From Cooler to Reservoir
HOSE FROM COOLER TO RESERVOIRREMOVAL
1. Drain the power steering fluid out of the reservoir.
2. Remove the hood weather-strip seal (2) at the radiator cowl.
3. Remove the 6 grille push pins (1).
4. Remove the spring clamp (2) from the fluid cooler (1).
5. Unseat the reservoir (5) by lifting up, Remove the fluid cooler hose spring clamp (4) to the reservoir (5).
6. Remove the fluid cooler hose (3) from the vehicle.
INSTALLATION
1. Install the fluid cooler hose (3) and spring clamp (4) to the reservoir (5).
2. Reinstall the reservoir (5) into the mounting slot.
3. Install the fluid cooler hose (3) and spring clamp (2) to the fluid cooler (1).
4. Refill the power steering fluid and bleed the system,
5. Start engine and check for leaks.
6. Install the grille and the 6 grille push pins (1).
7. Install the hood weather-strip seal (2) at the radiator cowl.