Removal

REMOVAL

1. Raise and support the vehicle.
2. Remove the tire and wheel assembly.
3. Remove the disc brake rotor Brake Rotor - Removal.
4. Remove the wheel speed sensor Front Wheel Speed Sensor - Removal.




5. Remove the lower clevis bolt (4) at the lower control arm.
6. Remove the upper clevis bolt (2) at the shock.
7. Remove the lower stabilizer link bolt at the lower control arm.
8. Remove the upper ball joint nut.
9. Separate the upper ball joint from the knuckle using remover 9360.
10. Swing the knuckle downward to allow clearance to remove the clevis bracket (3).
11. Remove the clevis bracket (3) from the vehicle.