Front Output Shaft Seal - Removal

REMOVAL










1. Shift transfer case into NEUTRAL.
2. Raise vehicle.
3. Remove front propeller shaft. Drive Shaft - Removal
4. Using Spanner Wrench 6958 (2), remove yoke nut. Discard nut after removal. It is not reusable.










5. Remove yoke (2) from output shaft. Use puller C-452 if flange can not be removed by hand.










6. Remove yoke rubber seal (1) from front output shaft.
7. Remove front output shaft seal with suitable pry tool, or a slide hammer mounted screw.