Air Suspension Spring And Shock Assembly - Description

DESCRIPTION

WARNING: All pressurized air suspension components contain high pressure air (up to 220 psig). Use extreme caution when inspecting for leaks. Wear safety goggles and adequate protective clothing when inspecting or servicing the air suspension system. A sudden release of air under this amount of pressure can cause personal injury or death.

WARNING: Support the vehicle by supplemental means before performing any work on the air suspension system to prevent the vehicle from changing height. Before any given component is to be serviced it must be deflated. Servicing the air suspension system without supplemental support, or with pressure in the specific component, can cause personal injury or death.




The air suspension spring and shock assembly (2) replaces the coil over spring on the front of the vehicle. The air suspension spring and shock assembly incorporates the air spring, shock, mounting brackets, and an air fitting for the air line. Service for the air suspension spring and shock assembly is as a complete assembly. For replacement procedures Front Shock Absorber - Removal and Front Shock Absorber - Installation.