Rear Output Shaft Seal - Removal

REMOVAL

Special Tools:















1. Remove the rear propeller shaft. Drive Shaft - Removal
2. Using Holder (1), remove the rear companion flange (2) nut.





3. Remove the rear output shaft flange from the output shaft. If necessary, use a suitable 2 or 3 jaw puller to remove the output shaft flange.





4. Remove the damper bolts and the damper from the transfer case, (if equipped).





5. Remove the rear output shaft seal with a suitable pry tool or a screw mounted in a slide hammer.
6. Remove the rear cover bolts and the rear cover from the transfer case.