Power Steering Pump - Installation

3.8L





1. Install pulley (1) on pump (if removed). Power Steering Pump Pulley - Installation.
2. Install pump on the engine.
3. Install 3 pump mounting bolts (2) and tighten to 26 Nm (19 ft. lbs.).





4. Install the pressure line on the pump and tighten to 31 Nm (23 ft. lbs.).
5. Install supply hose on pump.
6. Install drive belt, Serpentine Accessory Drive Belt - Installation.
7. Fill and bleed the power steering system Power Steering System Bleeding.
8. Check for leaks.
9. Install the air box assembly Air Cleaner Body - Installation.