Rear Vertical Motor

1. INSPECT REAR VERTICAL MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 2 and the negative (-) lead to terminal 1, and check that the motor turns clockwise.
b. Reverse the polarity, and check that the motor turns counterclockwise.
If operation is not as specified, replace the motor.

2. INSPECT REAR VERTICAL MOTOR CIRCUIT BREAKER OPERATION





a. Connect the positive (+) lead and the negative (-) lead from the battery to the rear vertical motor connector (illustrated terminals), and move the front edge of seat cushion to the highest position.
b. Continue to apply voltage, and check that there is a circuit breaker operation noise within 4 to 60 seconds.





c. Reverse the polarity, check that the seat cushion begins to descend within approximately 60 seconds.
If operation is not as specified, replace the motor.