Slide Motor

1. INSPECT SLIDE MOTOR OPERATION
a. Connect the positive (+) lead from the battery to terminal 1 and the negative (-) lead to terminal 2, and check that the motor turns counterclockwise.
b. Reverse the polarity, and check that the motor turns clockwise.
If operation is not as specified, replace the motor.

2. INSPECT SLIDE MOTOR CIRCUIT BREAKER OPERATION





a. Connect the positive (+) lead and the negative (-) lead from the battery to slide motor connector (illustrated terminals), and slide the seat to the front end position.
b. Continue to apply voltage, check that there is a circuit breaker operation noise within 4 to 60 seconds.





c. Reverse the polarity, and check that the seat begins to move backwards within approximately 60 seconds. If operation is not as specified, replace the motor.