Differential Side Seal

REPLACEMENT
1. REMOVE FRONT DRIVE SHAFT
2. REPLACE OIL SEAL





a. Using SST, remove the oil seal.
SST 09308-00010
b. Coat the hypoid gear oil to a new oil seal periphery.





c. Using SST and a hammer, install a new oil seal.
SST 09550-00032, 09950-70010 (09951-07100)
d. Coat the MP grease to the oil seal lip.
3. INSTALL FRONT DRIVE SHAFT





4. FILL DIFFERENTIAL WITH HYPOID GEAR OIL
Torque: 49 Nm (500 kgf-cm, 36 ft. lbs.)
Oil type: Hypoid gear oil API GL-5
Recommended oil viscosity:
Above -18°C (0°F) SAE 90
Below -18°C (0°F) SAE 80W-90 or 80W
Capacity: 1.70 liters (1.80 US qts., 1.50 Imp. qts)