Transfer Case Oil Seal
TRANSFER CASE OIL SEALREPLACEMENT
1. REMOVE ENGINE ASSEMBLY WITH TRANSAXLE
2. REMOVE TRANSFER STIFFENER PLATE RH
3. REMOVE AUTOMATIC TRANSMISSION W/TRANSFER
4. REMOVE TRANSFER ASSY
5. REMOVE CTR DIFFERENTIAL LOCK SLEEVE
SST 09308-00010
6. REMOVE TRANSFER CASE OIL SEAL
a. Using SST(s), remove the transfer case oil seal from the transfer case.
SST 09308-00010
NOTICE: Do not damage the oil-seal-fitted surface of the case.
7. INSTALL TRANSFER CASE OIL SEAL
a. Using SST(s), install a new transfer case oil seal to the transfer case at the position shown in the illustration.
SST 09387-00010, 09950-70010 (09951-07150)
NOTICE: Do not install it obliquely.
b. Apply small amount of MP grease to the oil seal lip.
8. INSTALL CTR DIFFERENTIAL LOCK SLEEVE
SST 09950-60010 (09951-00610), 09950-70010 (09951-07150)
9. INSTALL TRANSFER ASSY
10. INSTALL AUTOMATIC TRANSMISSION W/TRANSFER
11. INSTALL TRANSFER STIFFENER PLATE RH
12. INSTALL ENGINE ASSEMBLY WITH TRANSAXLE