Without Scan Tool

DTC check




1. Using SST, connect terminals TC and CG of the DLC3.
SST 09843-18040

2. Turn the ignition switch to the ON position.
3. Read the DTCs from the ABS and VSC TRAC warning lights on the combination meter.






HINT:
- If no code appears, inspect the TC and CG terminal circuit, and the ABS and VSC TRAC warning light circuits.

Trouble Area
TC and CG terminal circuit
ABS warning light circuit
VSC TRAC warning light circuit

- As examples, refer to the chart for the blinking patterns of the normal system code and trouble codes 11 and 21.

4. Codes are explained in the code table.
5. After completing the check, disconnect terminals TC and CG of the DLC3, and turn off the display.

If 2 or more DTCs are detected at the same time, the DTCs will be displayed in ascending order.