Without Navigation System

ENGINE OIL REPLACEMENT REMINDER LIGHT
The system must be reset after the engine oil replacement. Reset the system by the following procedure:

1. Turn the ignition key to the "ACC" or "LOCK" position with the odometer reading shown.

2. Turn the ignition key to the "ON" position while holding down the trip meter reset button.
Hold down the button until the light goes off. Before the light goes off, it illuminates for 3 seconds,flashes for 2 seconds and illuminates for 1 second.
If the system fails to reset, the light will continue flashing. In this case return to step 1 and try again.