Without Scan Tool

DTC CLEAR/RECHECK




a. Clear DTC
1. Press the "Code CLR" switch for 3 seconds.
2. Check result is cleared.

b. Recheck




1. Press the "Recheck" switch.




2. Confirm that all diagnostic codes are "OK" when the check results are displayed.

If a code other than "OK" is displayed, troubleshoot again.




3. Press the "LAN Mon" switch to change to "LAN Monitor" mode.




4. Confirm that all diagnostic codes are "No Err".

If a code other than "No Err" is displayed, troubleshoot again.