Adjustment

ADJUSTMENT

1. ADJUST REAR DISPLAY ASSEMBLY
a. How to reduce noise on the rear display assembly.
1. Prepare the vehicle:
- Turn the ignition switch to the ACC position.
- Turn the volume for the rear seats off.
- Display the automatic noise adjustment screen on the navigation display of the rear display assembly.




2. Press the buttons on the remote controller in the following order:
DISC/CH/PROG (UP) -> DISC/CH/PROG (DOWN) -> TUNE/TRACK (UP) -> TUNE/ TRACK (DOWN)




3. Adjust the display of the rear display assembly by pressing the A or B button on the rear display assembly until the noise cannot be seen.

HINT: The variable bar on the "PICTURE TUNING" screen also moves left and right in accordance with the A or B button operation.

4. Perform any of the following to finish the noise reduction mode of the rear display assembly:
- Turn the ignition switch off.
- Press the "DISPLAY" button on the remote controller.
- Switch to any other screen (OFF, SOURCE, MAP, DEST, MENU, DVD, or INFO) by using the remote controller.