Component Tests and General Diagnostics

INSPECTION




1. INSPECT FUEL LID W/MOTOR LOCK ASSEMBLY




a. Apply battery voltage to the lock control and check the motor operates in the direction.

b. Check the shaft stroke. Standard: 10.3 mm (0.406 in.) or more.




2. INSPECT FUEL FILLER OPENING LID LOCK SUBASSEMBLY




a. Check the fuel filler opening lid lock sub-assembly resistance.
If the result is not as specified, replace the fuel filler opening lid lock sub-assembly.




3. INSPECT FUEL FILLER DOOR OPENER SWITCH




a. Check the fuel filler door opener switch resistance.
If the result is not as specified, replace the fuel filler door opener switch.