Removal and Installation

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION: Wait for 90 seconds after disconnecting the cable to prevent the airbag working.




2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
a. Disengage the 4 clips and remove the instrument cluster finish panel sub-assembly.




3. REMOVE COMBINATION METER ASSEMBLY
a. Remove the 4 screws.
b. Pull out the combination meter assembly, and disconnect the connectors.

INSTALLATION




1. INSTALL COMBINATION METER ASSEMBLY
a. Connect the connectors.
b. Install the combination meter assembly with the 4 screws.




2. INSTALL INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY
a. Engage the 4 clips and install the instrument cluster finish panel sub-assembly.

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION

NOTE: Some systems need initialization when disconnecting the cable from the negative battery terminal.