Removal and Installation

FOG LIGHT ASSEMBLY

REMOVAL
1. REMOVE ENGINE UNDER COVER NO.1
2. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY LH
3. REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY RH
4. REMOVE FRONT BUMPER COVER




5. REMOVE FOG LIGHT ASSEMBLY LH
a. Release the 2 claw fittings, then pull out the fog light assembly LH.

INSTALLATION
1. INSTALL FOG LIGHT ASSEMBLY LH
2. INSTALL FRONT BUMPER COVER
3. INSTALL FRONT FENDER SPLASH SHIELD SUBASSEMBLY LH
4. INSTALL FRONT FENDER SPLASH SHIELD SUBASSEMBLY RH
5. PUT VEHICLE THESE CONDITIONS
6. ADJUST FOG LIGHT AIM