Suspension Control Module: Service and Repair

SUSPENSION CONTROL ECU

Components:

REMOVAL
1. REMOVE FRONT DOOR SCUFF PLATE RH
2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH
3. REMOVE INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2
4. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY
5. REMOVE ECM
6. REMOVE AIRCONDITIONER AMPLIFIER ASSEMBLY

7. REMOVE SUSPENSION CONTROL ECU
a. Disconnect the suspension control ECU connector.
b. Remove the 2 bolts and the suspension control ECU from the bracket.

INSTALLATION

1. INSTALL SUSPENSION CONTROL ECU
a. Install the suspension control ECU with the 2 bolts onto the bracket.
Torque: 7.8 Nm (80 kgf-cm, 69 inch lbs.)
b. Connect the suspension control ECU connector.
2. INSTALL AIRCONDITIONER AMPLIFIER ASSEMBLY
3. INSTALL ECM
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
5. INSTALL INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY NO.2
6. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
7. INSTALL FRONT DOOR SCUFF PLATE RH