Pinout Values and Diagnostic Parameters

TERMINALS OF ECM





1. ECM

HINT: Each ECM terminal's standard voltage is shown in the table.
In the table, first follow the information under "Condition". Look under "Symbols (Terminal No.)" for the terminals to inspected. The standard voltage between the terminals is shown under "Specific Condition".
Use the illustration above as a reference for the ECM terminals.
*1 : Shift lever with Multi-mode automatic transmission type








*2: Except" (Gate shift lever type)

Waveform 1:

Waveform 2:

Waveform 3:

Waveform 4:

Waveform 5:

Waveform 6:

Waveform 7:

Waveform 8:

2. Instrument Panel Junction Block Assembly (Multiplex Network Body ECU)