Removal

ENGINE HOOD / DOOR: HOOD SUPPORT ROD: REMOVAL

REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. REMOVE HOOD SUPPORT ASSEMBLY LH





(a) Remove the 2 bolts and the hood support from the hood panel.
HINT: While supporting the hood by hand, remove the hood support.

(b) Remove the bolt and hood support from the vehicle body.