Installation

AIR CONDITIONING: BLOWER UNIT: INSTALLATION

INSTALLATION

1. INSTALL BLOWER ASSEMBLY

(a) Install the blower assembly with the claw.
(b) Install the bolt and 2 screws.
BOLT - Torque: 9.8 Nm (100 kgf-cm, 87in-lbf)

(d) Install the clamp and connect the connectors.
2. INSTALL WIRING AIR INDICATOR HARNESS NO.2 SUB-ASSEMBLY
3. INSTALL AIR DUCT NO.2

(a) Install the air duct No. 2 with the screw.
Torque: 2.5 Nm (25 kgf-cm, 22in-lbf)
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation
5. INSTALL INSTRUMENT PANEL UNDER COVER NO.2 SUB-ASSEMBLY Installation
6. INSTALL COWL SIDE TRIM RH SUB-ASSEMBLY
7. INSTALL FRONT DOOR SCUFF PLATE RH
8. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
9. PERFORM INITIALIZATION
NOTICE:
Some systems need initialization when disconnecting the cable from the negative battery terminal.