Vehicle Damage Warnings

CAUTION:
- Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle can result in damaged components.
- If replacing only the front passenger seat cushion trim cover, the seat occupant sensor must be rezeroed.
- While positioning the seat cushion frame and occupant sensor assembly, be careful not to damage any of the components. Failure to do so can result in component failure.
- Use care when separating the seat cushion trim cover from the hook and loop strip. The hook and loop strip can be torn from the seat cushion foam.
- While positioning the seat cushion frame and occupant sensor assembly, be careful not to damage any of the components. Failure to do so can result in component failure.
- Failure to route the seat occupant sensor components through the correct seat cushion support opening can cause component failure.
- While positioning the seat cushion frame and occupant sensor assembly, be careful not to damage any of the components. Failure to do so can result in component failure.
- Inspect the occupant classification sensor assembly, seat cushion frame and support assembly for any foreign objects before installing the occupant classification sensor assembly to the seat cushion frame. If any foreign objects are found, remove them. Failure to do so may result in personal injury, in the event of an air bag deployment.
- When installing the seat backrest trim panel, be careful not to damage the J-hooks. If the J-hooks are damaged, install a new seat backrest trim panel.
- When removing the seat backrest trim panel, be careful not to damage the J-hooks. If the J-hooks are damaged, install a new seat backrest trim panel.