Lumbar Control Switch - Second Row

Lumbar Control Switch - Second Row

Removal and Installation

NOTE: For parts identification and location, refer to Seat - Exploded View, Second Row Seat - Exploded View, Second Row.

1. Separate the J-clips and open the cushion cover.





2. Separate the electrical connector from the front outboard seat track foot (if equipped), remove the 2 outboard inner cover screws and position the cover out of the way.





3. Remove the 3 screws and separate the outboard outer cover.





4. Separate the pin-type retainer, disconnect the lumbar switch and remove the outboard outer cover.





5. Disengage the retainers and remove the power lumbar switch.

6. To install, reverse the removal procedure.