Rear Door Latch: Service and Repair

Removal and Installation

1. Remove the rear door trim panel. Refer to REAR DOOR TRIM PANEL.




2. Position the water shield aside.




3. Disconnect the door latch electrical connector.
1. Release the clip.
2. Disconnect the electrical connector.




4. Position the rear door glass top run aside.
1. Remove the bolts.
2. Position the door glass top run aside.




5. Disconnect the exterior door handle actuating rod.
1. Open the clip.
2. Disconnect the actuating rod.




6. Remove and discard the rear door latch screws.
7. Remove the rear door latch.




8. Disconnect the interior door handle cable.
1. Release the cable conduit.
2. Disconnect the cable.

9. To install, reverse the removal procedure.