Operation CHARM: Car repair manuals for everyone.
Home >> Mazda >> 2007 >> CX-7 L4-2.3L Turbo >> Repair and Diagnosis >> Powertrain Management >> Transmission Control Systems >> Actuators and Solenoids - Transmission and Drivetrain >> Actuators and Solenoids - Differential >> Actuator >> Testing and Inspection

Actuator: Testing and Inspection

AWD SOLENOID INSPECTION
1. Disconnect the negative battery cable.
2. Disconnect the AWD solenoid connector.





3. Measure resistance between AWD solenoid connector terminals A and B. If the resistance is not within the specification, replace the coupling unit.

AWD solenoid resistance 1.5 - 2.0 ohms (Rear differential oil temperature at 20° C (68° F))

4. Connect the AWD solenoid connector.
5. Connect the negative battery cable.
pro multis · About Operation CHARM