Liftgate Window Glass: Service and Repair

LIFTGATE GLASS REMOVAL/INSTALLATION










1. Open the liftgate glass.

2. Remove the 2 liftgate glass nut access covers.

3. Through the RH access, disconnect the liftgate glass electrical harness connector.

4. Disconnect the LH heated window grid wire electrical connector.






5. Disconnect the 2 liftgate glass cylinders.
a. Slide the spring retainer to the end of the socket.

b. Disconnect the socket from the ball stud.

NOTE:An assistant may be needed to carry out this step.
6. Remove the 2 liftgate glass hinge nuts and the liftgate glass.

- To install, tighten to 7 Nm {0.7 kgf-m, 62 in-lbf}.

NOTE:An assistant may be needed to carry out this step.
7. To install, reverse the removal procedure.

- Transfer components as necessary.