Transaxle Support Insulator And Retainer - Rear Removal/Installation

--
TRANSAXLE SUPPORT INSULATOR AND RETAINER - REAR REMOVAL/INSTALLATION - HYBRID










Removal/Installation

1. With the vehicle in NEUTRAL, position it on a hoist. See Lifting.






2. Remove the rear insulator through bolt.

- To install, tighten to 115 Nm {11.7 kgf-m, 85 ft-lbf}.






3. Remove the rear insulator nuts and bolt.

- To install, tighten to 80 Nm {8.1 kgf-m, 85 ft-lbf}.






4. Remove the rear insulator studs.

- To install, tighten to 12 Nm {1.2 kgf-m, 106 in-lbf}.






5. Remove the rear insulator.

6. To install, reverse the removal procedure.