CONNECTING ROD SIDE CLEARANCE INSPECTION [WL-C, WE-C]

id0110b6503000

1. Install the connecting rod cap. (See CYLINDER BLOCK ASSEMBLY (I) [WL-C, WE-C].)

2. Measure the connecting rod large end side clearance. Replace the connecting rod and cap if necessary.

bwl1ge00000275

Standard connecting rod side clearance

0.110—0.262 mm {0.0043—0.0103 in}

Maximum connecting rod side clearance

0.35 mm {0.014 in}

3. Remove the connecting rod cap.