AFTER REPAIR PROCEDURE [WL-C, WE-C]

id0102b9801100

1.  Connect the M-MDS to the DLC-2.

absggw00000683

2.  After the vehicle is identified, select the following items from the initialization screen of the M-MDS.

•  When using the IDS (laptop PC)

1.  Select“Self Test”.

2.  Select“Modules”.

3.  Select“PCM”.

4.  Select“Retrieve CMDTCs”.

•  When using the PDS (Pocket PC)

1.  Select“Module Tests”.

2.  Select“PCM”.

3.  Select“Self Test”.

4.  Select“Retrieve CMDTCs”.

3.  Verify the DTC according to the directions on the M-MDS screen.

4.  Press the clear button on the DTC screen to clear the DTC.

5.  Verify that no DTCs are displayed.