REAR OIL SEAL REPLACEMENT [WLT-1, WLT-2]

id011096800900

1.  Disconnect the negative battery cable.

2.  Remove the flywheel. (See CLUTCH UNIT REMOVAL/INSTALLATION [M15M-D, R15M-D, R15MX-D].)

3.  Remove in the order indicated in the table.

4.  Install in the reverse order of removal.

absggw00001398

1	Rear oil seal (See Rear OIl Seal Removal Note.) (See Rear Oil Seal Installation Note.)

Rear OIl Seal Removal Note

1.  Cut the oil seal lip by using a razor knife.

2.  Remove the oil seal by using a screwdriver protected with a rag.

absggw00001399

Rear Oil Seal Installation Note

1.  Apply soapy water along the perimeter of the new oil seal.

2.  Push the oil seal slightly in by hand.

3.  Tap the oil seal in evenly using the SST and a hammer.

absggw00001400

4.  To ensure that the oil seal is installed correctly, measure the distance between the end of the rear cover and the face of the oil seal.