SUSPENSION TECHNICAL DATA

id025000800100

Front wheel alignment [4x2] (Unloaded)

Item

Specifications

Except high clearance model

High clearance model

Regular cab and freestyle cab

Double cab

Regular cab and freestyle cab

Double cab
Total toe-in
Tire
[Tolerance
±3 {0.12}]
(mm {in})
5 {0.19}
6 {0.23}
 
degree
0°25′±15′
0°28′±14′
Maximum steering angle
Inner
33°00′—37°00′
31°30′—35°30′
Outer
30°00′—35°00′
27°00′—32°00′
Camber angle (reference value)
[Tolerance ±1°]
0°35′
0°44′
0°45′
Caster angle (reference value)
[Tolerance ±1°]
1°56′
1°54′
2°07′
2°06′
Steering axis inclination
(reference value)
8°25′
10°37′
10°35′

Note
•  Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
•  Difference between the left and right dimension for camber is within 30′.
•  Difference between the left and right dimension for caster is within 45′.

Front wheel alignment [4x4] (Unloaded)

Item

Specifications

Regular cab and freestyle cab

Double cab
Total toe-in
Tire
[Tolerance ±3 {0.12}]
(mm {in})
6 {0.23}
 
degree
0°28′±14′
Maximum steering angle
Inner
31°30′—35°30′
Outer
27°00′—32°00′
Camber angle (reference value) [Tolerance ±1°]
0°44′
0°45′
Caster angle (reference value) [Tolerance ±1°]
2°07′
2°06′
Steering axis inclination (reference value)
10°37′
10°35′

Note
•  Unloaded vehicle: Fuel tank is full. Engine coolant and engine oil are at specified level. Jack and tools are in designated position.
•  Difference between the left and right dimension for camber is within 30′.
•  Difference between the left and right dimension for caster is within 45′.

Wheel and tires

Item

Specification
Wheel
Size
15 × 6 1/2J
15 × 6 1/2J
16 × 7J
Offset
(mm {in})
20 {0.79}
25 {0.98}
10 {0.39}
Pitch circle diameter
(mm {in})
139.7 {5.500}
Material
Steel
Aluminum alloy
Steel
Steel
Aluminum alloy
Tire
Size
215/70R15C 106/104S
235/75R15 109S
245/70R16 111S
Air pressure
(kPa {(kgf/cm2), <psi>})
Front
Up to full persons
220 {(2.2), <32>}
210 {(2.1), <30>}
210 {(2.1), <30>}
Full load
Rear
Up to full persons
210 {(2.1), <30>}
210 {(2.1), <30>}
210 {(2.1), <30>}
Full load
375 {(3.8), <54>}
290 {(2.9), <42>}
270 {(2.7), <39>}
Remaining tread
(mm {in})
1.6 {0.06}
Wheel and tire
Lug nut tightening torque
(N·m {kgf·m, ft·lbf})
88.2—117.6 {9.00—11.99, 65.06—86.73}
Wheel and tire runout
Radial direction
1.5 {0.06} max.
(mm {in})
Lateral direction
2.0 {0.08} max.
Wheel imbalance*2
(g {oz})
10 {0.35} max.

*1  :Total weight exceeds 120 g {4.24 oz}.
*2  :One balance weight: 60 g {2.12 oz} max. If the total weight exceeds 120 g {4.24 oz} on one side, rebalance after moving the tire around on the rim. Do not use three or more balance weights.

Suspension

Item

Specification
Front lower arm ball joint rotational torque [pull scale reading]
20—34 N {2.0—3.5 kgf, 4.4—7.7 lbf}
Front upper arm ball joint rotational torque [pull scale reading]
4.9—25 N {0.5—2.5 kgf, 1.1—5.5 lbf}