SPEED SENSOR REMOVAL/INSTALLATION [5R55S]

id0316c1815700

Caution

•  Water or foreign material entering the connector can cause poor connections or corrosion. Be sure that water or foreign material do not enter the connector when disconnecting it.

•  Do not damage the speed sensor.

1.  Disconnect the negative battery cable.

2.  Remove the transfer case under cover. (See AUTOMATIC TRANSMISSION REMOVAL/INSTALLATION [5R55S].)

3.  Remove in the order indicated in the table.

arnffw00001914

1	Connector (wiring harness-side)
2	Connector (part side)
3	Connector cover
4	Clutch coil terminal
5	Speed sensor bracket
6	Wiring harness bracket
7	Speed sensor

4.  Install in the reverse order of removal.