STARTING PROCEDURE FOR ON-BOARD DIAGNOSTIC TEST MODE [AUDIO]

id0902f6358300

Note

• All DTCs displayed in the on-board diagnostic test mode should be entered in the Audio Repair Order Form.

1. Turn the ignition (F2, G6)/engine (WLT-1, WLT-2, WL-C, WE-C) switch to the ACC or ON position.

2. Turn the audio power to OFF.

3. While pressing the POWER/VOLUME button, simultaneously press the FM 1 button and the MEDIA button for 2 s or more.

absggw00001714

1

FM 1 button

2

MEDIA button

3

SEEK/APC/TRACK switch

4

POWER/VOLUME button (without RDS (radio data system))

5

POWER/VOLUME button (with RDS (radio data system))

Note

• If several DTCs are in the memory, they can be displayed using the SEEK/APC/TRACK switch (up or down).

4. To stop the on-board diagnostic test mode, turn the ignition (F2, G6)/engine (WLT-1, WLT-2, WL-C, WE-C) switch to the LOCK position.

1	FM 1 button
2	MEDIA button
3	SEEK/APC/TRACK switch
4	POWER/VOLUME button (without RDS (radio data system))
5	POWER/VOLUME button (with RDS (radio data system))