CLEARING DTC [AUDIO]

id0902f6841000

Caution

• Before clearing the memory, be sure to enter all of the DTCs displayed in the on-board diagnostic test mode in the Audio Repair Order Form.

1. Start the on-board diagnostic test mode.

2. While pressing the POWER/VOLUME button, simultaneously press the AUDIO CONT/TUNE/TEXT button for 2 s or more.

absggw00001715

1

AUDIO CONT/TUNE/TEXT button (without RDS (radio data system))

POWER/VOLUME button (with RDS (radio data system))

2

POWER/VOLUME button (without RDS (radio data system))

AUDIO CONT/TUNE/TEXT button (with RDS (radio data system))

3. To stop the on-board diagnostic test mode, turn the ignition (F2, G6)/engine (WLT-1, WLT-2, WL-C, WE-C) switch off.

1	AUDIO CONT/TUNE/TEXT button (without RDS (radio data system))
	POWER/VOLUME button (with RDS (radio data system))
2	POWER/VOLUME button (without RDS (radio data system))
	AUDIO CONT/TUNE/TEXT button (with RDS (radio data system))