SIDE PROTECTOR INSTALLATION

id091600801200

1. Remove the adhesive remaining on the side protector and the body using a razor.

Warning

• Using a razor with bare hands can cause injury. Always wear gloves when using a razor.

2. Remove any grease or dirt from the adhesion surface of the side protector and the body.

3. Attach double-sided adhesive tape to the side protector as shown in the figure.

Clearance

a: 18.0 mm {0.70 in}

b: 3.0 mm {0.11 in}

c: 2.0—5.0 mm {0.08—0.19 in}

d: 8.0—10.0 mm {0.32—0.39 in}

e: 15.0 mm {0.59 in} (Double cab)

f: 9.0 mm {0.35 in} (Double cab)

g: 9.0—11.0 mm {0.36—0.43 in} (Freestyle cab)

h: 13.0 mm {0.51 in} (Freestyle cab)

i: 8.0 mm {0.31 in} (Freestyle cab)

j: 0.5—2.0 mm {0.02—0.07 in}

dbg916zwb002

4. Peel off the backing paper from the double-sided adhesive tape and attach the side protector onto the body as shown in the figure.

Clearance

a: 14.8 mm {0.58 in}

b: 4.6 mm {0.18 in} (Double cab)

c: 5.0 mm {0.19 in}

d: 4.5 mm {0.18 in} (Freestyle cab)

dbg916zwb003