FRONT FOG LIGHT AIMING

id091800802200

Note

•  When using an aiming tester to input the inclination angle (tilt angle) of the optical axis, input 2.0% for the inclination angle.

1.  Make an adjustment screen as shown in the figure using double-weight, white paper.

dpe918zw1021

2.  Adjust the tire pressure to the specification.

3.  Position the unloaded vehicle on a flat, level surface.

4.  Seat one person in the driver"s seat.

5.  Set the fog lights 3 m {9.8 ft} from the white screen.

abs0zw00003679

6.  Place an object in front of the fog light not being adjusted to block its light beam.

7.  Start the engine so that the battery remains charged.

8.  Turn the front fog lights on.

9.  Loosen the screw and the adjusting bolt, move the front fog light in the direction of the arrows, and adjust the center of the front fog light to the position shown in the figure.

abs0zw00003680

10.  Tighten the adjusting bolt, then tighten the screw.