CONNECTING ROD INSPECTION [WLT-1, WLT-2, WL-3]
id011097502800
1. Measure each connecting rod for bending and distortion.
-
• If it exceeds the maximum specification, replace the connecting rod.
-
Maximum connecting rod bending
-
0.075 mm {0.0030 in}/50 mm {2.0 in}
-
Maximum connecting rod distortion
-
0.18 mm {0.0071 in}/50 mm {2.0 in}
-
Connecting rod center-to-center distance
-
151.96—152.04 mm {5.9827—5.9858 in}
2. Measure the length of the connecting rod bolt.
-
• If it exceeds the maximum specification, replace the connecting rod and connecting rod cap.
-
Standard connecting rod bolt length
-
67.5—68.5 mm {2.66—2.69 in}
-
Maximum connecting rod bolt length
-
69 mm {2.7 in}
