CONNECTING ROD SIDE CLEARANCE INSPECTION [WLT-1, WLT-2, WL-3]

id011097503000

1.  Install the connecting rod cap. (See CYLINDER BLOCK ASSEMBLY (I) [WLT-1, WLT-2, WL-3].)

2.  Measure the connecting rod large end side clearance.

•  If it exceeds the maximum specification, replace the connecting rod and connecting rod cap.
bwl1ge00000082
Standard connecting rod side clearance
0.110—0.262 mm {0.0044—0.0103 in}
Maximum connecting rod side clearance
0.35 mm {0.014 in}

3.  Remove the connecting rod cap.