VALVE CLEARANCE INSPECTION [WLT-1, WLT-2, WL-3]

id011097503500

1. Turn the crankshaft and align the timing mark so that the piston of the No.1 or No.4 cylinder is at TDC of compression.

2. Measure valve clearances A with the No.1 cylinder at TDC of compression, and those of B with the No.4 cylinder at TDC of compression.

• If it is not within the specification, adjust and recheck the valve clearance.

bwl1ge00000086

bwl1ge00000087

Valve clearance (engine cold)

IN: 0.05—0.15 mm {0.0020—0.0059 in}

EX: 0.15—0.25 mm {0.0060—0.0098 in}

3. Turn the crankshaft one full turn and measure the remaining valve clearances. Adjust if necessary.