CAMSHAFT INSPECTION [WL-C, WE-C]

id0110b6501500

1.  Set the No.1 and No.5 journals on V-blocks. Measure the camshaft runout. Replace the camshaft if necessary.

dbg110aeb114

Maximum camshaft runout
0.03 mm {0.001 in} max.

2.  Measure the cam lobe height at the two points as shown in the figure. Replace the camshaft if necessary.

dbg110aeb080

Standard cam lobe height
IN: 42.067—42.167 mm {1.6561—1.6601 in}
EX: 41.949—42.049 mm {1.6515—1.6554 in}
Minimum cam lobe height
IN: 41.717 mm {1.6424 in}
EX: 41.599 mm {1.6377 in}

3.  Measure the journal diameters in the X and Y directions at the two points (A and B) as shown in the figure. Replace the camshaft if necessary.

dbg110aeb081

Standard cam journal diameter
No.1: 31.940—31.965 mm {1.2575—1.2582 in}
No.2—No.4: 25.910—25.935 mm {1.0201—1.0210 in}
No.5: 25.940—25.965 mm {1.0212—1.0222 in}
Minimum cam journal diameter
No.1: 31.890 mm {1.2555 in}
No.2—No.4: 25.860 mm {1.0181 in}
No.5: 25.890 mm {1.0193 in}