PISTON INSPECTION [WL-C, WE-C]
id0110b6502100
1. Measure the outer diameter of each piston at right angle (90°) to the piston pin, 20 mm {0.79 in} below the oil ring land lower edge.
-
Piston diameter [WL-C]
-
Standard: 92.918—92.944 mm {3.6582—3.6592 in}
0.25 {0.010} oversize: 93.153—93.179 mm {3.6675—3.6684 in}
0.50 {0.020} oversize: 93.403—93.429 mm {3.6773—3.6782 in}
-
Piston diameter [WE-C]
-
Standard: 95.918—95.944 mm {3.7763—3.7773 in}
0.25 {0.010} oversize: 96.153—96.179 mm {3.7856—3.7865 in}
0.50 {0.020} oversize: 96.403—96.429 mm {3.7954—3.7964 in}
